All Categories



  • Displaying 4/4

Product Features:

  • Brand new RFID security access control with card reader and digital keypad
  • Great access control for home, offices, banks, prisons, factories and other establishments
  • Provides excellent protection to the access entrance and exits
  • With LED and buzzer to indicate the working status
  • Allows enrolling and deleting cards information individually or continuously
  • Supports different entry modes: card or PIN, card + PIN
  • Both private PIN and public PIN are acceptable
  • With access to change door open time during break
  • Controller will auto exit programming mode in 20 seconds no movement
  • System can be restored to factory default
  • High capacity of 500pcs cards capacity
  • 3-digit index code: range from 001-500
  • When enrolling multiple cards, every card index code will be calculated in order

Product Specifications:

  • Normal mode - LED and Buzzer:
  • --- Valid command: Short beep
  • --- Invalid command: Long beep
  • Programming mode - LED and Buzzer:
  • --- Green LED on
  • --- Valid command: Two short beeps
  • --- Invalid command: Three beeps
  • Factory Defaults:
  • --- Programming PIN: 990101
  • --- Door Open Mode: Card or public PIN (1234)
  • --- Default Private PIN: 0000
  • --- Door Open Time: 3 seconds
  • --- Anti-Break Alarm: Disabled
  • --- Door Contact Alarm: Disabled
  • --- Lock Status: Disabled
  • --- Alarm Delay: 0 seconds
  • --- Modify Private PIN: Disabled
  • Card Capacity: 500
  • PIN Capacity:
  • --- Public PIN: 1 groups
  • --- Private PIN: 500 groups
  • Internal Reader Frequency: ID model: 125KHz
  • Proximity Card: ID model: EM or compatible
  • Lock interface: Relay output or level output
  • Exit Button: One interface
  • Bell: One interface
  • Door Contact: One interface
  • Alarm Mode: Door close delay and illegal open by force
  • Voltage: 12VDC+10%
  • Current: 150mA
  • Lock Relay: 12VDC/2A
  • Working Temperature: 0℃~45℃
  • Storage Temperature:-10℃~55℃
  • Working Relative Humidity: 40%~90%RH
  • Storage Relative Humidity: 20%~90%RH
  • Size: 116 x 116 x 21mm
  • Color: silver

Package Contents:

  • 1 x RFID Card Reader Digital Keypad Access Control
Available Shipping Method Tracking NO. Estimated Delivery

Note:

1) Estimated delivery time includes processing time and actual shipping time. Normally our processing will take 1-2 working days.

2) Estimated Delivery Time shown above is only for reference, since actual delivery time depends on shipping service selected, delivery schedule and local customs clearance time, especially during peak periods.

3) Shipping Costs shown include fuel surcharges and may change a bit due to the fluctuation of currency exchange rates.

4) For the order with only one item (only one item):

a. if your item is less than 20USD and need registered freight, you need to pay certain upgrading fee.
b. if your item is more than 20USD, our system will ship your item with tracking number automatically free of charge.

5) For the order with multiple items (multiple items):

a. if most items' price is more than 20USD in one order, we will send the parcel with tracking number for free.
b. if most items in one order is low value with reasonable weight and size, our Checkout process is able to identify such order giving free registered freight on it.
c. if most items in one order are low value but with relatively high weight (i.e. Value: Weight ratio is not in reasonable range), we will charge certain discounted upgrading fee if you need tracking number.

Custom Tax

A. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.

B. Please check with your country's customs office to determine what these additional costs will be prior to buying.

Return Policy

All the cell phones you bought from Tinydeal.com come with 6-month warranty and all the items we offer have a 3-month warranty. See additional details, please refer to our Shipping & Returns or our FAQ Return Policy.

Ask questions, Share opinions, Gain insight. Welcome to TinyDeal Discussion Forum
Post New Topic

Discussion
No discussions yet.

Want to join in this discussion, sign in or create an account to post or reply. We will give you instant bonus 1-5 TD Points Thanks for your support.
Tips:TinyDealDiscussion Forum is an open platform. All topics of our products are allowed here except spam. For professional questions, please contact us via sales@tinydeal.com or post them in our FAQ for a guaranteed response. We make every effort to make the quickest replies.



Customer Reviews
Average customer review:
4 (4out of 5)
Averages for categories
  • Price
  • Easy Of Use
  • Build Quality
  • Usefulness
  • Customer Service
Please wait
Sort by:

Showing 1-10 of 15 reviewsSee all 15 customer reviews . . .

  • Overall
  • Price
  • Easy Of Use
  • Build Quality
  • Usefulness
  • Customer Service
by soha ( BA ) 2012-06-13 21:13:12 GMT

very good, perfect condition can be used for many things, easily. may be included with the alarm system .. awesome P. S.  can you describe someone jampere

Add a comment(1)
Was this review helpful to you?
  • Reply by LimitMan:
    Džamperi služe za resetovanje na fabrička podešavanja. Ako se dobro sećam uputstva 1-2 čuva, 2-3 resetuje.
  •  



  • Overall
  • Price
  • Easy Of Use
  • Build Quality
  • Usefulness
  • Customer Service
by Maria ( RU ) 2012-02-16 15:12:51 GMT

Works normally. Keys ordered SAC-5478, SAC-5475 and SAC-16099. In a programming mode at RFID-key record in memory there are some problems. After an input in a mode of programming and pressing [5] we bring a card and occurs nothing. Long suffered, while has found the decision. After pressing [5] it is necessary to enter any four-unit code, for example 0907, and then it is possible to bring keys one after another. All works.

Работает нормально. Ключи заказывал SAC-5478,SAC-5475 и SAC-16099. В режиме программирования при записи RFID-ключа в память есть некоторые проблемы. После входа в режим программирования и нажатия [5] подносим карту и ничего не происходит. Долго мучился, пока нашел решение. После нажатия [5] нужно ввести какой-нибудь четырехзначный код, например 0907, и потом можно подносить ключи один за другим. Все работает.

Add a comment(1)
Was this review helpful to you?
  • Reply by Slider:
    Вопрос, магнитный замок я так понимаю нужно вешать через реле? Не подскажете где найти подробную инструкцию по установке? Ну там что куда и как подключать... А то с китайским туговато... :)
  •  



  • Overall
  • Price
  • Easy Of Use
  • Build Quality
  • Usefulness
  • Customer Service
by Andrei ( EE ) 2011-11-28 20:21:00 GMT

Silver Metallic Proximity Multi Doors Lock RFID Card Reader Digital Keypad Smart Security Access Control SAC-4828

Прибор выполнен в нормальном качестве пришёл через 10 дней до таточно быстрый заказ.!
Хочеться быстрее. Качество проверю....обяхательно отпишу!!!

Add a comment(0)
Was this review helpful to you?


  • Overall
  • Price
  • Easy Of Use
  • Build Quality
  • Usefulness
  • Customer Service
by Hasan ( TR ) 2011-10-19 07:24:42 GMT

Price and performance of this device is perfect. Only problem is out relay very weak. You must use 2. relay.
It is plastic and not usefull outside and you can use only proximity card, password or prox card+password.Programming is very easy but it is not connected to pc.There is not comunication port.

Add a comment(0)
Was this review helpful to you?


  • Overall
  • Price
  • Easy Of Use
  • Build Quality
  • Usefulness
  • Customer Service
by towar ( CZ ) 2011-09-10 17:39:58 GMT

Voltage
12VDC+ 10% , Current 1.2A

Lock Relay
12VDC/ 2A

Environmental Temperature
working: 0 ~ 45 ;

storage: -10 ~ 55

Relative humidity
working: 40% ~ 90% RH;

storage: -20% ~ 90% RH

Card Capacity
500

PIN Capacity
Public PIN: 1 Private PIN: 500

Internal Reader Frequency
ID model: 125KHz

ICmodel: 13.56MHz

Proximity Card
ID model: EM or compatible

IC model: Mifare1 or compatible

Card Reading Distance
ID model: 5 - 15CM

IC model: 3 - 5CM

Lock interface
Relay output or level output

Exit Button
One interface

Bell
One interface

Door Contact
One interfa
ce

Alarm Interface
One level output

External Reader
One weigand26 interface ( Only apply to certain models)

Factory Defaults
Item
Value

Programming PIN
990101

Door Open Mode
Card or public pin ( 1234)

Private PIN
0000

Door Open Time
3 seconds

Anti-Break Alarm
Disabled

Door Contact Alarm
Disabled

Lock Status
Disabled

Alarm Delay
0 seconds

Modify Private PIN
Disabled

The LED an Buzzer
Normal mode:
Valid command: Short beep
Invalid command: Long beep
Programming mode:
Green LED on
Valid command: Two short beeps
Invalid command: Three beeps

Cancel Command
Press the [ * ] key to cancel command.

Functions and Setup
Enter the programmingmode
Press [ * ] + [ 6-digit pin] ( Default is 990101)

Modify the programming pin
Press [ 0]

+ [ new 6-digit pin]

+ [ confirm the new 6-digit pin]

Enroll card
Press [ 5]

+ [ 3-digit index code] ( 2 beeps)

+ [ Card1] ( beep, 2 beeps)

+ [ Card2] ( beep, 2 beeps)

+ … …

+ [ Cardn] ( beep, 2 beeps)

+ [ * ] ( 2 beeps)

3-digit index code: range from 001-500. Card can be deleted by this code.
When enrolling multiple cards, every card index code will be calculated in order. For example, card one’ s index code is 15, card two’ s will be 16.
The default private pin for each card is 0000

Delete card
Delete by index code
Press [ 7]

+ [ 3-digit code1] ( 2 beeps)

+ [ 3-digit code2] ( 2 beeps)

+ … …

+ [ 3-digit coden] ( 2 beeps)

+ [ * ] ( 2 beeps)

Delete by presenting card
Press [ 7]

+ [ Presenting Card1] ( beep, 2 beeps)

+ [ Presenting Card2] ( beep, 2 beeps)

+ … …

+ [ Presenting Cardn] ( beep, 2 beeps)

+ [ * ] ( 2 beeps)

Delete all cards
Please restore the factory default

The private pin will be deleted when the card is deleted
Exit programming mode
Press [ * ] ( 2 beeps)

Set up door open mode
Card or pin mode
Press [ 1] + [ 0] ( 2 beeps)

Card + private pin mode
Press [ 1] + [ 1] ( 2 beeps)

PINs
The pin in “ Card or PIN” mode is either the public pin or private pin ( at most 500) .

Disable changing private pin
Press [ 1] + [ 2] ( 2 beeps)

Enable changing private pin
Press [ 1] + [ 3] ( 2 beeps)

Change private pin
Press [  ] ( 2 beeps)

+ [ Presenting card] ( beep, 2 beeps)

+ [ 4-digit old pin] ( 2 beeps)

+ [ 4-digit new pin]

+ [ confirm the new pin] ( 2 beeps)

Change public pin
Press [ 3] + [ 4-digit pin] ( Default 1234)

When the public or private pin is 0000, the pin is void in “ Card or pin” mode.

Change door open time
Press [ 2] + [ TT]

TT is the time interval in seconds. For example, if the door open time is 3 seconds, then TT= 03.

Anti-break
Disable anti-break: Press [ 4] + [ 0]
Enable anti-break: Press [ 4] + [ 1]
Door contact sensor
Disable door sensor: Press [ 6] + [ 0]
Enable door sensor: Press [ 6] + [ 1]
Door sensor alarm
Disable alarm: Press [ 8] + [ 0]
Enable alarm: Press [ 8] + [ 1]
After turning on this function, the controller will give off continuous long beep when the door is not closed after normal opening, or the door is not opened through the controller.

Alarm delay time
Press [ 82] + [ TT] .

TT is the time interval in seconds. For example, if the delay time is 3 seconds, then TT= 03.

When door is locked TT seconds, if the door contact sensor is in alarm status, the controller is in alarm mode. This function should be used when the door sensor alarm is on.

Restore factory default
Press [ 86] . There will be 2 beeps, 3 beeps and 3 beeps after 5 seconds, then the factory defaults are restored.

User’ s instruction
Card or PIN mode
The pins should be entered in 2 seconds
Press [ * ] key to cancel pin input
Card + Private PIN mode
[ Reading card] + [ enter 4-digit pin] to open
Press [ * ] key to cancel pin input
Reset programming pin
Short the J2 on controller to reset the programming pin to factory default

Frequently asked questions
Symptom
Possible solutions

After the lock is opened, there are 8 short beeps
The controller needs higher voltage; the power supply should be checked.

The card reading distance is short or card cannot be read
1. If the controller is on metal surface, it should be moved to other place.

2. Check the power supply.

After reading card, there are 3 beeps and lock is not open
1. It’ s in card+ pin mode.

2. [  ] key is pressed, wait for 5 seconds to present the card.

The enrolled card cannot open the door
1. Check if the door sensor is in alarm status.

2. Disable the door sensor alarm.

Press [ * ] + [ Programming pin] there is long beep and cannot enter the programming mode
Other keys are pressed before pressing the [ * ] key. Keep on pressing [ * ] key after long beep, then enter the programming mode again.

Press [  ] key, there is a long beep, the private pin cannot be changed
Other keys are pressed before pressing the [ * ] key. Keep on pressing [ * ] key after long beep, then press the [ * ] key again.

Press [ 5] , there are 3 beeps
The controller has full card capacity.

Press [ 5] + [ index code] , 3 beeps
This index code is in use, select another index code.

Press [ 5] + [ index code] 2 beeps + [ presenting card] 3 beeps
This card is in use.

The controller exit programming mode
In programming mode, if there is no input in 20 seconds, the controller exits programming mode automatically.

Wiring
With normal power supply
DOOR
To door contact
The other end to DGND

DGND

POENSW
To exit button
The other end to DGND

PUSH/ NO
To GND of the fail-safe lock
The other end off the lock to 12VDC

NC
To GND of the fail-open lock
The other end off the lock to 12VDC

GND
To the GND of power supply

+ 12VDC
To the + 12V of power supply

BELL
To door bell

BELL
To door bell

JP3
Short JP3

JP2
Short 1, 2

With access control power supply
DOOR
To door contact
The other end to DGND

DGND

POENSW
To exit button
The other end to DGND

PUSH/ NO
To PUSH on power supply
Lock should be wired to power supply’ s NC and GND.

NC

GND
To the GND of power supply

+ 12VDC
To the + 12V of power supply

BELL
To door bell

BELL
To door bell

JP3
Do NOT short JP3

JP2
Short 2, 3
... [ Read more ]

[ Withdraw ]
Add a comment(0)
Was this review helpful to you?


  • Overall
  • Price
  • Easy Of Use
  • Build Quality
  • Usefulness
  • Customer Service
by vigzo ( HU ) 2011-08-18 12:26:10 GMT

if you dont read chinese, here is the mg 236b programming manual:


Functions and Settings (All functions should be set in programming mode; the parameters can be set repeatedly; the effective setting should be the last one.)
Enter programming mode:

Press [*]+[6 digits programming PIN],2 beeps;
(default code 990101))
Under programming state, it should be noted that:

The controller cannot perform normal function instructions.
If there is no programming instruction within 20 seconds, system will automatically quit programming mode and enter the normal working mode.
Successfully set parameters, 2 beeps;
Fail to set parameters, 3 beeps;
Before some setting instruction is finished(i.e. the controller have already given off 2 beeps for successful setting, or 3 beeps for failed setting), i
f the input instruction is mistaken,press [*], the controller gives off a long beep, meaning that the setting of the instruction has been cancelled.
Change programming PIN:

Press [0]+[6 digits new programming PIN]+[repeat 6 digits new programming PIN], 2 beeps;

Enrolling Cards:

Press [5]+[8 digits card number] or [present a card to the controller], a beep, then 2 beeps, then the card was added successfully, if want to enroll the next card, press [the next 8 digits card number] or [present the next card to the controller], a beep, then 2 beeps, then the card was added successfully, enrolling more cards, repeat above mentioned operating steps, press [*] to finish enroll cards in the end;

Notice: [8 digits card number]: there are two team card number on card commonly

for example: 0016497924251,48388

This control use “16497924”

Enrolling A team connective Cards

Press [9]+[8 digits first card number]+[8 digits end card number], 2 beeps.

Deleting authorized card:
Press [7]+[8 digits card number] or [present the card to the controller], 2 beeps……[the next 8 digits card number] or [present the next card to the controller], press [*] to finish deleting authorized cards in the end.
Deleting all authorized cards: if the customer needs delete all cards, please restore the controller to factory defaults.
Set Public PIN:

Press [3]+[4 digits public PIN], 2 beeps;

Press [3]+[0000], 2 beeps, eliminate all “public PIN”

Exit programming state:

Press [*], 2 beeps;

Set door open mode:
Card or Public PIN:

Press [1]+[0], 2 beeps;

Card plus Public PIN;

Press [1]+[1], 2 beeps;

Set Lock Relay Time:

Press [2]+[TT], 2 beeps;

TT represents unlocking time, second as unit; if unlocking time is 3 seconds, TT=03;

Set Anti-Break Alarm:
Disable anti-break alarm: press [4]+[0], 2 beeps;
Enable anti-break alarm: press [4]+[1], 2 beeps;
Set check door sensor state before open the door
Disable check door sensor state: press [6]+[0], 2 beeps;
Enable check door sensor state: press [6]+[1], 2 beeps
Set door sensor alarm state:
Disable door sensor alarmfunction: press [8]+[0], 2 beeps;
Enable door sensor alarmfunction: press [8]+[1], 2 beeps;

After turning on this function, the controller will give off continuous long beep when the door is not closed after normal opening, or the door is not opened through the controller;

Restore factory defaults:

Press [8]+[6], 2 beeps, then 3 long beeps, 3 short beeps after 5 seconds, enter normal working state;

Under programming mode, if there is no programming instruction within 20 seconds, the system will automatically quit the programming mode and enter normal working mode.
Users’ Instructions:

1. Card or public PIN mode:

1)Read authorized card: After a short beep, green light is on, yellow light is off and the door is open.

2)Public PIN entered: Green light is on, yellow light is off and the door is open;

The customer should continuously type in 4 digits public PIN; the interval between each key pressing should be less than 2 seconds. If the interval is more than 2 seconds, the system will automatically quit this time’s PIN input.

3)If the customer entered the wrong PIN, press [*], and enter the right PIN again to open the lock.

2. Door opening mode of card + PIN

1)Read authorized card, after a beep,

Enter the right 4 digits Public PIN within 5 seconds, the green light is on and the door is unlocked;
Not enter the PIN within 5 seconds, the buzzer gives off a long beep and the door is not unlocked;
Wrong 4 digits PIN is entered, the buzzer gives off a long beep and the door stays locked; read card again, enter the right PIN to unlock the door.
Wrong PIN for less than 4 digits, press [*], need not to read card again, directly input the right PIN and unlock the door;

2)Read unauthorized card, the buzzer gives off a beep, then a long beep when pressing the first PIN, and the door stays locked.
... [ Read more ]

[ Withdraw ]
Add a comment(1)
Was this review helpful to you?
  • Reply by Lev:
    Thank you very much for translating the instructions, without these it would be quite hard to program the device.

    Can you please tell us the connection pin-out? I don't quite understand what should be connected to what, and I don't want to risk damaging the unit. I only understood from the manual that there are two lock connection options (controlled by the jumper), but the exact pin-out is not clear.

    Also, do you have any idea what other pins/jumpers are for?
  •  



  • Overall
  • Price
  • Easy Of Use
  • Build Quality
  • Usefulness
  • Customer Service
by Marcelo ( BR ) 2011-07-09 17:45:50 GMT
Involvement: Expert (understands the inner workings) Ownership: less than 1 week

Pros: The interface is really easy to understand and putting it to work is
quite easy.
The price is really low compared to the ones I can find in my country
(Brazil).

Cons: Doesn't come with a power supply, so you have to provide it
externally.

Other: I think this is something more for inside places, since external areas
can offer more risks and opening the device from outside is not that
hard. But it should be ok for controlling access in more private
areas.

Bottomline: I recommend: the price is ok, you can buy as many cards as you want in
different shapes and colors and it is a cool, "modern" access control
device.

Add a comment(0)
Was this review helpful to you?


  • Overall
  • Price
  • Easy Of Use
  • Build Quality
  • Usefulness
  • Customer Service
by Евгений ( RU ) 2014-10-09 07:43:58 GMT

купил, все пришло , вещь качественная , описание на китайском...ну да мы в России теперь все знаем китайский...ноу проблем...что то тут написано про карты...какие карты - фиг поймещь..250 карт в памяти...как пользоваться - фиг поймешь...а вообще интересная вещь!!!

0 of 0 people found this review helpful.
Add a comment(0)
Was this review helpful to you?


  • Overall
  • Price
  • Easy Of Use
  • Build Quality
  • Usefulness
  • Customer Service
by angy_v ( UA ) 2013-06-29 18:10:14 GMT

Доехала целой и невредимой. Планирую использовать с электромагнитным замком. Пока в раздумьях какую модель замка выбрать и как все это хозяйство подключить. Прибор пришел с китайским мануалом, но в сети есть мануалы и на английском.

Add a comment(1)
Was this review helpful to you?
  • Reply by Евгений:
    есть замки или приводы замков с эл. моторчиком...это лучший выбор!
  •  



  • Overall
  • Price
  • Easy Of Use
  • Build Quality
  • Usefulness
  • Customer Service
by Galeno ( BR ) 2012-07-25 20:02:39 GMT

Produto fabricado com material de alta qualidade, muito facil de utilizar e muito parecido com o original, acho o preço um pouco alto, mais mesmo assim muito inferior do praticado no meu pais.

Add a comment(1)
Was this review helpful to you?
Showing 1-10 of 15 reviewsSee all 15 customer reviews . . .

Please Login first if you want to submit your product review.

    Indicates required fields*
    Ratings:
    Easy Of Use :
    Price :
    Build Quality :
    Usefulness :
    Customer Service :
    Overall :
    Review Summary: *

    Login to post a review

    Sorry, but you only can make review on this product after purchasing it.



Message
Are you going to sign up for a new member?

Sign Up Now



Copyright © 2017 TinyDeal Direct Online Store.